A true small family cruiser

Boat overview

Leidi 660 Overview

A true small family cruiser

New Leidi 660 is a true small family cruiser that many people will want to have on their boat berth. This boat is designed for families with children, elderly couple, or for people who want to enjoy a good weekend with friends at sea.

Leidi 660 Specifications

Leidi 660 will provide maximum comfort on open sea or anchorage, and will make the owner proud in every aspect. Maximum utilization of the hull creates space below decks that can be compared with the much longer vessels, and the traditional commitment of the Leidi shipyard to all details, and final touches are a guarantee that Leidi 600 boat will become a leader in this class of vessels.

The design follows the guidelines set in the larger model, Leidi 800, with retro style colored hull, roof and integrated solar panels. The maximum dimensions of side windows allow an abundance of light and greeater enjoyment on the sea, while single windshield glass, same as we have on bigger model (leidi 800) increases visibility and safety of the boat.

Also on this model we have four frontal cabin windows (most in the class) providing more daylight and translucence.

Leidi 660 Technical data

Technical data

  • Length over all: 7,20 m
  • Hull length: 6,60 m
  • Beam: 2,50 m
  • Draft: 0,7 m
  • Weight: from 1750 to 2200 kg
  • Drive: Outboard engine up to 150 HP
  • Leidi 660 Exterior

    Hull

  • Deeper V profile in frontal part of the boat contributes to more comfortable driving
  • Longitudinal fins take care of maximum control and prevent "sliding" in sudden side turns and also direct the sea strikes to the hull side
  • A special form of the underwater part of the bow eliminates unwanted prow "steering"
  • Leidi 660 Verzije Motora

    Cockpit

  • Elevated longitudinal limiter contributes to the stability and comfort of the boat, and also allows wide sliding bench alongside the vessel
  • Stern bench with the closure of the outboard motor engine well is now used in full width
  • Enabled easier entry into the cockpit from stern platform
  • Stern platforms covered with teak in standard version
  • Standing height at the cabin entrance(184cm)
  • Deck

  • Higher side passes enable easier movement to the prow
  • Sunbathing area on the frontal part of the cabin
  • Integrated bowsprit for better firmness with a weight reduction contains elegantly placed anchor that does not bother when getting down the boat
  • Leidi 660 Interior

    Upper cabin

    Designed for longer cruises, Leidi 660 offers a sufficient number of beds for three adults or two adults with children. We offer two versions with separate toilet area, or with integrated toilet under the bed, making it possible to have bigger dormitories and monovolumen space below decks.

  • Standing height in saloon(195 cm)
  • Deck saloon – booth in windows level for even more comfort, by lowering turns in bed (185 x 75 cm)
  • Enabled the installation for two refrigerators
  • More spacious kitchen block with cabinets for dishes and other kitchen equipment
  • Waterproof storages under the flooring in the hallway and under the table are sufficient for storing weekly food supplies and equipment
  • Raised helm station provides excellent visibility in navigation
  • Big helm console is enough to accommodate all the necessary devices and equipment
  • Leidi 660 Interior

    Lower deck

  • Easier entrance into a large serene toilet area with window (dimensions 70x70x160cm)
  • Enabled the installation of a large wardrobe closet 80x40x50 cm
  • Hanging cabinets above the bed
  • Height in lower deck 156 cm(110cm above the bed)
  • Possibility of two variants: separate toilet area, or bathroom with integrated partial bulkhead under the bed
  • Leidi 660 Standard equipment

  • Completely of polyester hull, deck, counter moulded interior, cabin and upper cabin space, six container covers on deck and anchor bulkhead
  • 3 upper cabin aluminium windows - 2 with slide opening (tempered glass, nuanced, thermo-resistant); 1 frontal
  • 2 side round cabin windows
  • Aluminium entrance door
  • 4 holes to drain water from cockpit
  • 4 stainless steel bitts
  • Cover and container fitting (12 stainless steel hinges, 3 locks)
  • Rubber fender with terminations
  • Electrical installation (stainless steel mast, 5 navigation lights, 4 roof lamps, horn, control panel with circuit breakers, socket 12 V, main switch, 2 batteries 75 Ah and 100 Ah, 2 measuring instruments – fuel level indicator and working hours counter and windshield wiper)
  • Stainless steel railing with a plastic bowsprit; F130
  • Leidi 660 Standard equipment

  • Stern plastic platform – left with ladder and right with auxiliary engine support (teak coated)
  • 2 stainless steel handrails 1000 mm, 2 upper cabin stainless steel handrails 1000 mm, 2 stainless steel handrails 450 mm
  • Storage container’s covers on the counter moulded beds (Mahogany)
  • Toilet door (mahogany), Skipper’s Chair, stainless steel footboard
  • Submersible bilge pump (automatic) - 2 pieces
  • sides and cabinets covers (mahogany), ceiling cover (3 pieces)
  • Teak laminate flooring in the cabin
  • Bedroom pillows, booth pillows, booth table
  • solar panels 2x100W
  • Leidi 660 Optional equipment

  • Anchor winch 500 W, 12 V, stainless steel
  • Calibrated Chain 6 mm (length: 50 m)
  • Anchor 7,5 kg
  • Underwater hull protection (4 layers of epoxy primer, 3 layers of antifouling paint)
  • Gas cooker with kitchen sink (stainless steel)
  • gas bottle
  • water tank 100 l
  • refrigerator
  • electrical water pump with shower
  • jabsco toilet (manual)
  • Hydraulic steering with pump, cylinder and wheel
  • Leidi 660 Optional equipment

  • Bimini with stainless steel construction
  • Stainless steel stern fence
  • Radio - USB PORT, with loud speakers
  • navigation device according to customer's wish
  • cowl
  • 2 folding benches
  • stainless steel tank
  • air heater
  • Leidi About us

    Craft info...

    Youth and the enthusiasm along with the knowledge, top quality and unique design are the characteristics of the Croatian shipbuilding craft company Leidi which realizes all your wishes and needs. After many years of experience in the shipbuilding business, in 2005. craft company Leidi has been established by the shipbuilder of plastic vessels Marsel Brkic.

    Craft produces glass reinforced plastic boats which are used for fishing, entertainment and family cruises. Till 2009 year we produced around 100 vessels Leidi 490 in three models. " Lady for the deep sea and the shallow pocket " recently has received also its heiress, new model Leidi 600. Longer and faster Leidi becomes the " Lady for every sea ", and her design, excellent space utilization and maritime abilities will satisfy the most demanding buyers.

    by the mid 2013. we made the latest model in fleet - Leidi 800. Speed, cost-effectivness, design quality, comfort are new requirements in the modern shipbuilding industry, and Leidi 800 meets them all.

    Leidi Contact info

    Contact us...

  • Address: Poduzetnička zona 19, 52216 Galizana (Pula, Croatia)
  • GSM: +385 98 926 67 96
  • Phone / Fax: +385 (0)52 566 505
  • E-Mail: leidi.pula@gmail.com
  • Data protection
  •  
     
    LOADING